Surface soil roughness is affected by many factors, such as the residual effect of the soil management, tillage and rainfall erosivity and, together with the soil cover of crop residues, influences water erosion. The objective of this study was to determine the effects of a chiseling operation, together with rainfall erosivity, on soil surface roughness, from June 2005 to March 2006, in an aluminic Typical Hapludox, under the following soil management systems: bare soil under conventional tillage (BCT), cultivated soil under conventional tillage (CCT), no-tillage in a never-tilled soil with burnt plant residues (BNT), and traditional no-tillage (TNT). The crop sequence in the treatments CCT, BNT and TNT was black oat, soybean, common vetch, corn, black oat, common bean, fodder radish, soybean, common vetch, corn and black oat. Five simulated rain tests were applied, with a constant intensity of 64 mm h-1 and durations of 20, 30, 40, 50, and 60 min each. Natural rains during the experimental period accounted for 57 mm, between the 2nd and 3rd rainfall test; 21 mm, between the 3rd and 4th test; and, 30 mm, between the 4th and 5th test. The surface roughness was determined immediately before and immediately after the chiseling tillage, and immediately after each test of rain simulation. The original and linear soil surface roughness was not influenced by the management, unlike random roughness, at the end of a six-month fallow period. The original, linear and random roughness in different soil management systems was affected by a six-month fallow period, when the soil was subjected to chiseling. Random roughness was less influenced by soil slope than by tillage marks, which decreased with the increasing rainfall erosivity. The coefficient of decay of this kind of soil roughness was similar in the studied soil management systems under no tillage and conventional tillage.
simulated rain; soil roughness decay; surface microrelief
